The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

forestb · 11-01-2012, 04:30 PM

I had a set of 2.5 inch cpp spindles and they did not work with the stock rim but worked fine with a 15X8 after market rally wheel. When I switched over to the 2 inch drop modular spindle it rubbed against the balancing weights on the inside of my wheel but that was the spindle for the 77 c10 because I put a 77 cross member in my 62. I would just go with the 2.5 inch regular spindle if you front tires are 245s.

11-01-2012, 04:30 PM	#26
forestb Registered User Join Date: Jan 2009 Location: Burbank, CA Posts: 3,626	Re: drop spindle selection I had a set of 2.5 inch cpp spindles and they did not work with the stock rim but worked fine with a 15X8 after market rally wheel. When I switched over to the 2 inch drop modular spindle it rubbed against the balancing weights on the inside of my wheel but that was the spindle for the 77 c10 because I put a 77 cross member in my 62. I would just go with the 2.5 inch regular spindle if you front tires are 245s.