The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

cableguy0 · 10-20-2003, 05:05 PM

there should be a nut where the line screws into the power steering box and into the power steering pump loosen and remove those nuts the line will come out as a whole assembly but your gonna need a line wrench and soak the fitting in pb blaster for a while in hope of getting them out without stripping them. go get the new line b4 you take the old one off and you will be able to understand better what im talkin about

10-20-2003, 05:05 PM	#6
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,948	there should be a nut where the line screws into the power steering box and into the power steering pump loosen and remove those nuts the line will come out as a whole assembly but your gonna need a line wrench and soak the fitting in pb blaster for a while in hope of getting them out without stripping them. go get the new line b4 you take the old one off and you will be able to understand better what im talkin about __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.