The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

cubber · 11-05-2012, 10:58 PM

Man, to swap brakes I think you just need the proportioning valve that hooks to the mast. cyl. with short lines, then you hook your existing lines into the valve. have a 69 I swapped from manual drum to power disc, and that was all I changed on the plumbing. Also, search the suspension section, there is a thread about how low on bags with stock lca's. I was surprised. I haven't put my drop spindles or bags on yet, but they are in the shop waiting. Talk to Travis with ProPerformance here on the board. He can get you some good deals. Good luck, and badass truck- Matt

11-05-2012, 10:58 PM	#150
cubber Registered User Join Date: Mar 2012 Location: Leanna, TN Posts: 2,061	Re: Rat Bagged 70 Man, to swap brakes I think you just need the proportioning valve that hooks to the mast. cyl. with short lines, then you hook your existing lines into the valve. have a 69 I swapped from manual drum to power disc, and that was all I changed on the plumbing. Also, search the suspension section, there is a thread about how low on bags with stock lca's. I was surprised. I haven't put my drop spindles or bags on yet, but they are in the shop waiting. Talk to Travis with ProPerformance here on the board. He can get you some good deals. Good luck, and badass truck- Matt __________________ =MATTHEW 69 Stepper...Stroked & Bagged GONE BUT NOT FORGOTTEN 2003 Chevrolet Z71 Ext. Cab 1995 Cavalier gas saver!