The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

clinebarger · 11-08-2012, 10:18 PM

Yes, Tighten all 11mm bolts to 22 ft.lbs.

Turn all 11mm bolts 90 degrees.

Turn all "Long" 11mm bolts an additional 90 degrees.

Turn the 2 "Short" 11mm bolts an additional 50 degrees.

Tighten the top row of 8mm bolts to 22 ft. lbs.

11-08-2012, 10:18 PM	#2
clinebarger Senior Member Join Date: May 2009 Location: Fort Worth, TX Posts: 6,370	Re: Question about head installation Yes, Tighten all 11mm bolts to 22 ft.lbs. Turn all 11mm bolts 90 degrees. Turn all "Long" 11mm bolts an additional 90 degrees. Turn the 2 "Short" 11mm bolts an additional 50 degrees. Tighten the top row of 8mm bolts to 22 ft. lbs.