[CC69Rat]

.. Yep. Here are a few pictures. The sway bar is on, everything for the most part (except the emergency brake cable is too short) on the brakes, axle, etc is all set. I'm waiting on a little fun money to build back up then I'll get my track bar and lower shock bar from Nate.

We have the exhaust temporarily ran to the side just so we can get it to the muffler shop. I will be changing it over to 5"x22" Magnaflow round ones. (inboard, then over the axle as best we can.

To finish up the back:

Driveshaft - 62 3/8 we measured for it yesterday (trans tail shaft seal to pinion yolk centerline) .. the drop shortened the drive shaft about 5/8" .. Wow. Plus the fact we're going with a 1 piece now.. I guess that had a lot to do with it.

Shocks - cant measure until I get the shock bar
Shock bar
Track bar
Brackets, etc.
Finish up the Em Brake cable

then on to the front

Once everything is mounted up and we get the bed back on I might want to add more block too. Maybe a 2" ? We'll see. It has a 1" in it now. I would like to keep my U bolt legth till we get it back on the ground, the right wheels on it, the bed back on .. just so I can sit it perfect and cut the bolts off then.

Anyway .. here she is. The wheels on it are the ones for my stepper (255/45) and look a bit narrow for a fleetside. Don't worry .. they're comin ..