The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Quick question on starter types, 60's vs 80's

Tx Firefighter · 11-20-2012, 10:08 PM

If you're using the block mounted starter with the two bolts, you must have the proper starter bolts, not just generic 3/8 bolts. The proper bolts have a larger shoulder which is knurled to keep the starter from shifting around. You can get the right bolts at the parts store or from GM.

11-20-2012, 10:08 PM	#4
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: Quick question on starter types, 60's vs 80's If you're using the block mounted starter with the two bolts, you must have the proper starter bolts, not just generic 3/8 bolts. The proper bolts have a larger shoulder which is knurled to keep the starter from shifting around. You can get the right bolts at the parts store or from GM.