[gmachinz]

The burban bucket seats will not bolt to the stock pickup floors....the angle of the rear seat track is wrong. I just put suburban buckets in my 86, and I used a LH and RH bench seat track set on each bucket. Then, I had to add a hole on each seat track as well as add a hole for the seat retension spring. Not a lot of work...bit you have to do it to make it right. And, the bench seat tracks are also 5" too long so they need trimmed down. 3 of the 4 seat mount will line up once you tack the front inner standoff seat bracket in place-you need to secure the rear inner track to the floor. Simple method is drill a hole and use a nut/bolt-a better option is to drill a hole for use with a metric rivnut so its a factory look, then just thread a standard seat track bolt down and you're done! I have some pics in the project section under K10 Shorty Revival.
Posted via Mobile Device