The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**leddzepp** · 11-23-2012, 12:43 AM

Here is a set of 5 degree pinion angle shims for lowered trucks. They will also lower your truck an additional 1/2 inch. Included is a set of bumpstops that can be used inside of a c-notch, or bottom of the frame rail if not running a c-notch. $40 Shipped in the USA for all.
Posted via Mobile Device
Posted via Mobile Device

11-23-2012, 12:43 AM	#1
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,124	Pinion angle shims, bumpstops Here is a set of 5 degree pinion angle shims for lowered trucks. They will also lower your truck an additional 1/2 inch. Included is a set of bumpstops that can be used inside of a c-notch, or bottom of the frame rail if not running a c-notch. $40 Shipped in the USA for all. Posted via Mobile Device Posted via Mobile Device Attached Images __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul