[Alan's Classic]

Originally Posted by Ta2Don

The hose routing is awesome and I especially like the zip-ties...

Thanks Don!! The zipties might be my temp solution for a while til I get everything operating. I've been looking for some nice hose seperators that will mount the hoses as well as seperate.

Originally Posted by Strodder

Nice job Alan

Thanks Dennis!!

Originally Posted by sdailey

Nice work as usual buddy.

Thanks Shannon!!

Originally Posted by theastronaut

Very nice work Alan! On the glass setting tape, you did the right thing since it was a little loose with one layer and didn't have thicker tape. Its supposed to be tight, we usually have to use a special glass puller to get vents out of the frames and regulator tracks off. It is okay to use adhesive, but only at the ends-less than an inch on each end so the glass will come out later.

Also, I saw your want ad for bumper filler plates. Have you thought about just making a pair? The outer bent edges don't show once bolted up and it's easy to make the dimples with a ball bearing and socket. If you want to make your own I can send one of mine to uses as a pattern.

Great tip on the adhesive. BTW thanks for the comments.

Yes I have thought about making some. I had two old sets somewhere. I can't seem to located them. Thanks for the offer. I might make a template from cardboard. If that doesn't work I'll let you know. There is a guy about 30 miles from me that has a set for sale. I might make the journey.

Originally Posted by VA72C10

Nice!