The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

cdowns · 10-24-2003, 03:43 PM

first thing i'd check would be the cotter pin and see if it's hitting the dustcap, after that i'd remove the rotor and inspect the spindle and bearings, b-4 replacing the spindle i'd get new bearings and see if that solves the problem

10-24-2003, 03:43 PM	#12
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	first thing i'd check would be the cotter pin and see if it's hitting the dustcap, after that i'd remove the rotor and inspect the spindle and bearings, b-4 replacing the spindle i'd get new bearings and see if that solves the problem __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY