|
Re: Help! k20 rotor removal with sears/selectro hubs
I think you can push that hub in and then there's a snap ring on the shaft.
Also once you get the rotors off you pound the studs out to seperate the rotor from the hub.
__________________
68' C20. 283CI w/55CC 305HO heads, NP435 Close Ratio, Corp. 14 bolt FF 3.21, 75' front end swap (everything but the X-member).
Last edited by airdale94; 12-06-2012 at 06:23 PM.
Reason: add
|