Quote:
Originally posted by phantom dually
I had the same problem recently with my new rotors and bearings. I pulled it all apart and repacked bearings only to find it was the cotter pin rubbing on the dust cap. Oh well better safe than sorry. Check the cap again and look for scratch marks.
|
I've checked the pin, what i did was put a thin layer of grease on the inside of the cap, then I drove it around the block (i heard the noise), then I took the cap off and looked at it, and there were no signs of the pin scrapin gthe grease off. I even bent the tip of the pin back father and tried at again, and the noise still happens.
So I know its not the pin.