The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

77c10 · 12-13-2012, 10:03 AM

I bought a set of 20" Boss 338's recently. My front one's would not fit flush against the rotors. I ended up ujsing my 4.5" grinder and a flap wheel and ground on the snout of the rotor behind where the dust cap is. All is well now and the ceter cap fits fine. I tried spacers at first but just did not feel comfortable running them.

12-13-2012, 10:03 AM	#7
77c10 Registered User Join Date: Aug 2011 Location: Gallatin, TN Posts: 782	Re: Guys running Boss 338's please read I bought a set of 20" Boss 338's recently. My front one's would not fit flush against the rotors. I ended up ujsing my 4.5" grinder and a flap wheel and ground on the snout of the rotor behind where the dust cap is. All is well now and the ceter cap fits fine. I tried spacers at first but just did not feel comfortable running them. __________________ 77 C10, 6.0LS/4L80E, 3:73 12 bolt. Boss 338's 20" x 10" w/ 285/50/20 rear. 20" x 8.5" w/ 245/40/20 front. Vintage Air. Full Autometer gauges recessed in factory bezel (Thanks bigblock73!) Gm Storm Grey Metallic paint "Cool ain't ever cheap and cheap ain't ever cool"