The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**LockDoc** · 12-18-2012, 11:13 AM

Welcome!

Yes, the doors from the bigger trucks will fit, but you will have to weld a corner on the bottom front where it was cut off to fit the hump in the fender/floorboard. On another note, the complete floor will fit except for the front corners also. Quite a few of the big trucks have really nice floors in them. I cut a nice one out of a big truck over at the salvage yard and my friend Ron and I welded into his '69 C-20.

LockDoc

12-18-2012, 11:13 AM	#3
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 26,078	Re: 1972 door ? Welcome! Yes, the doors from the bigger trucks will fit, but you will have to weld a corner on the bottom front where it was cut off to fit the hump in the fender/floorboard. On another note, the complete floor will fit except for the front corners also. Quite a few of the big trucks have really nice floors in them. I cut a nice one out of a big truck over at the salvage yard and my friend Ron and I welded into his '69 C-20. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - Last edited by LockDoc; 12-18-2012 at 12:19 PM.