[mrhurt73]

the front end comes off the C-10 series pretty easy, 7 main bolts on each side, the large bolts are 3/4" and smaller ones are 5/8" with 11/16" nuts. these are all socket sizes not actual thread size. note the bottom 5/8" bolts the nuts are welded on, so no need to remove upper A-arm to hold nuts.

also power steering box is held on with 4 bolts and idler arm held on with 2 bolts. and motor mount plates are held in place with 4 9/16" bolts, you can reach around the lower A-arms to hold the nuts on the back side. take these plates off first makes it much easier to get to other bolts.

dont forget brake hoses are bolted to top A-arms also.

anybody need some stock front end parts ha ha.