|
Re: Need some help on How to install an HEI distributor
I just did this on mine. My motor was from a 72 el camino.
Easy way on TDC is to pull your cap off, and rotate tell it points to 1 sp wire, then look at your timing mark and when its on 0, your TDC. There is a more accurate way, but it takes a tool that screws into the spark plug.
The kit I got was from summit, I question if its an MSD?
I ran a specific 12ga wire from key accessory, to a 20am fuse, then to the dizzy. That yellow wire looks to small.
|