|
Re: Quadrajet question
It will work just fine. Run a hot wire to it that is only hot when the ignition is on, and then it will work as long as it is adjusted properly. If you have an air choke, you'll have to make provisions to block off the port at the manifold. Other than that, you should be fine. It will bolt right up.
__________________
Steve
Member of the Foot Pedal Club
'83 Chevy K20: 6" Rough Country, 3" Performance Accessories BL,
Bushwacker Cutouts, 38x15.50 Mickey Thompson Baja Claws,
350 HP 350 crate engine from Jegs, Turbo 400
|