View Single Post
Old 01-11-2013, 12:56 AM   #12
ls1nova71
Registered User
 
ls1nova71's Avatar
 
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,119
Re: 5.3 start problems

Ok, if jumping the plug cranked the engine over then that part of the circuit is good. Your problem is going to be on the other side of the relay, the 85 and 86 terminals. One of them will have power when you crank it the other will be ground. Chech to see if you have power in the crank position by putting a test light on it and have someone turn the key to crank. Also check to see that the other side has a good ground.
Posted via Mobile Device
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html

5.3 swap into my RUSTY '71 C10
http://ls1tech.com/forums/conversion...71-c-10-a.html
ls1nova71 is offline   Reply With Quote