The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

ray_mcavoy · 01-14-2013, 07:42 PM

Since the rear shackles run from the spring hanger up to the spring, I don't think it's even possible to do a shackle lift on these trucks.

You probably could compensate for the height difference in the 2wd spring hangers by using some lift blocks between the spring & axle. Or better yet, some higher arch lift springs.

01-14-2013, 07:42 PM	#4
ray_mcavoy Registered User Join Date: Nov 2009 Location: Sherman, ME Posts: 2,373	Re: K10 spring hanger Since the rear shackles run from the spring hanger up to the spring, I don't think it's even possible to do a shackle lift on these trucks. You probably could compensate for the height difference in the 2wd spring hangers by using some lift blocks between the spring & axle. Or better yet, some higher arch lift springs.