[PBFAB.COM]

Raul-

I went and took a couple other measurements for reference on that front bracket. My thinking is that if the front bracket is NOT in the right location we can just make a set of bars that will fit so that there will not be the need to relocate/redrill a bunch more holes.

We made the front four link bracket so it fit the leaf spring chassis, they actually bolt into place of the front spring hanger on the leaf spring frames. If we measure back 6" from the rearmost rivet on the front bed mounting bracket (see pics for reference) it will put us in the correct fore-aft location for the front upper mounting bolt on the four-link bracket. Take a look at these pics and we can determine if it's too far forward or in the intended location.

Again, I apologize for the inconvenience on the parts.