The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

A.Bursell · 01-22-2013, 01:55 AM

I did put a little black RTV around the edge of the gasket. Probably not necessary as this new gasket is cut much tighter around the wiper motor than the original. Same size outside dimension, but this one is tight enough that I had to have the arm off the motor to slip it on. I think it will seal well, and a little extra didn't hurt.

Thanks guys.

Adam

01-22-2013, 01:55 AM	#7
A.Bursell Registered User Join Date: Jul 2012 Location: Marysville, WA Posts: 298	Re: Wiper Motor Gasket Help I did put a little black RTV around the edge of the gasket. Probably not necessary as this new gasket is cut much tighter around the wiper motor than the original. Same size outside dimension, but this one is tight enough that I had to have the arm off the motor to slip it on. I think it will seal well, and a little extra didn't hurt. Thanks guys. Adam