|
Belts
Hey Diane, they bolted in with no mods.
I used a 3" piece of 2x2x.125 < on driver's side and a 2" piece of 1x3x.125< on passenger’s side. A machine shop made the 1x3.
The angles bolted in using original stock bolts. The belts are temporarily attached to top, until I get roll bar, using 7/16" FT bolts in stock holes. The shoulder straps are a little long for this application and tend to slide off my shoulder. I think they will work great on the roll bar.
Sorry, no photos.
...Dan
|