Quote:
Originally Posted by beonkey
X2 on drilling the hole through the rivet. Took me too long to figure that out! 
Posted via Mobile Device |
It's all good, It's taken me many a years to learn my magic. I've also used a similar trick, Just more refined to remove broke off, froze up bolts in many things. including the unders side of my top for the mounting bolts. (double wall) I saved like 5 or 6 of them and didn't have to cut into the top. Just you have to be good with the drill.
Back on topic, the hardest part I think about swapping frames is finding where to cut the section out in the middle of the frame from a pickup. and then working up the nerve for the first cut and trust your measurments.