The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Rocker boxes, To remove or not to remove?

chevy_fatman · 11-02-2003, 01:02 PM

In this pic you can see some of the rocker box inside has some pitting from the rust, again, there's not rust through.

I will most likely use Rust Bullet encapsulator to take care of the rust, as I've read that this product desn't need as much prep as POR15 does, the bullet just requieres you to clean up the rust and aply 2 coats and is done, anybody used the rust bullet product here? results?

Thanks Paul.

11-02-2003, 01:02 PM	#2
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,620	In this pic you can see some of the rocker box inside has some pitting from the rust, again, there's not rust through. I will most likely use Rust Bullet encapsulator to take care of the rust, as I've read that this product desn't need as much prep as POR15 does, the bullet just requieres you to clean up the rust and aply 2 coats and is done, anybody used the rust bullet product here? results? Thanks Paul. Attached Images