|
Re: cpp drop spindle and lower ball joint
Balljoints say 73-87 (upper) and 71-87 (lower).
So you need a 73-87 spindle.
They either sent you the wrong spindles or the balljoints are packaged wrong.
I say you have the wrong spindle.
Since 71-87 take the same lower balljoint,... that must be a 63-70 spindle.
CPP is known for these kind of mistakes.
Too bad you are so far away.
Do the outer tie rods they sent you fit the spindle?
What part number are they?
They should be 73-87 outer tie rods, to match your ball joints.
|