Re: '66 Longbed 327 w/AC project
Did lots of rust repair work on the BBW panel (one soft spot on rounded edge, and one upper corner rotted away, used piece from other panel. Primered and painted the back since i won't be able to get to it later, and started the sound/heat insulation that will go under it since i won't be able to get in there once that piece is up. Also, ground down the remnants of the spot welding for the BBW panel since it's not the same one i cut out, spot welds won't line up and will cause the panel not to sit tight. Hopefully by weekend, BBW panel in, then can POR-15 the inner roof panel's outer side, then heat/sound insulate that, then roof panel back on.
|