The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

wyattglock · 02-03-2013, 05:51 PM

Depending on the condition of the hardware, you might have to cut them off and get new bolts. Thats what I had to do on my 89. Fortunately, LMC has the stainless bolt kit to replace the factory bolts. If the bolts aren't rusted to the nuts, then make sure you keep the head of the carriage bolts against the bumper or they will just spin.

02-03-2013, 05:51 PM	#5
wyattglock Registered User Join Date: Jul 2010 Location: Lafayette, IN Posts: 622	Re: Help with bumper bolts? Depending on the condition of the hardware, you might have to cut them off and get new bolts. Thats what I had to do on my 89. Fortunately, LMC has the stainless bolt kit to replace the factory bolts. If the bolts aren't rusted to the nuts, then make sure you keep the head of the carriage bolts against the bumper or they will just spin.