When I was done with that, I decided I was tired of tripping over my axle. So I installed the bushings into the trailing arms, put them on the axle, and slid it under the frame. Put the panhard bar on the frame, and them swung the trailing arms up and into the frame brackets. Easier going back on that coming off, but not by much. jacked the axle up, slid the bar on the bolt, lifted it up some more and installed the springs. tightened the whole thing up and dropped the jack. All bolted together except missing shocks. Next stop is doing the rear drums.
Also while the hood was drying I got the broken back slider out. When you don't care about the gasket comes out really easy with a utility knife! Gasket was dried out and cracked anyway.
Done for today... more this weekend!
