The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Dale99 · 02-09-2013, 12:54 PM

I damaged the spindle cone threads when taking off the spindle nuts because I didnt know there was two.(post 7)

The parts store helped me figure out the two spindle cones, and rotor/hub assy left in the truck is around 78'ish k10. One of them is what I put on when I damaged my original one. The 78 makes sense since I also have a np203 transfer case.

So I have to decide to get a 72 spindle cone, or find another 78 hub in a few weeks when I do the other side. I dont want miss-matched sides.

02-09-2013, 12:54 PM	#21
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: Ball Joint, tips advice? I damaged the spindle cone threads when taking off the spindle nuts because I didnt know there was two.(post 7) The parts store helped me figure out the two spindle cones, and rotor/hub assy left in the truck is around 78'ish k10. One of them is what I put on when I damaged my original one. The 78 makes sense since I also have a np203 transfer case. So I have to decide to get a 72 spindle cone, or find another 78 hub in a few weeks when I do the other side. I dont want miss-matched sides.