The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Shaved Doors

Sammy · 02-10-2013, 07:05 PM

Looks like the adjustable one are 7/8"-1 1/8" length. So at the hinge popping the door an inch would well clear ur latch width. I would try them at the hinge then if you were not pleased with the action you could plug the hole out of site. That is my thoughts anyway. Post how you come out. Sure someone will run across this issue in the future it helps if someone solves and offers a solution for others to consider.

02-10-2013, 07:05 PM	#5
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: Shaved Doors - What pushers are you using? Looks like the adjustable one are 7/8"-1 1/8" length. So at the hinge popping the door an inch would well clear ur latch width. I would try them at the hinge then if you were not pleased with the action you could plug the hole out of site. That is my thoughts anyway. Post how you come out. Sure someone will run across this issue in the future it helps if someone solves and offers a solution for others to consider. __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"