The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**aerotruk63** · 02-12-2013, 02:35 PM

The ignition wire plug has a bevel to it you need to push the harness inside towards the glovebox first then pry out the grommet. The heater wire grommet should not be that difficult to push out.

02-12-2013, 02:35 PM	#2
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: How remove wiring plugs from firewall The ignition wire plug has a bevel to it you need to push the harness inside towards the glovebox first then pry out the grommet. The heater wire grommet should not be that difficult to push out. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1