The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Bret B · 02-12-2013, 05:03 PM

Just pulled mine out last week. The plugs are held in with semi-hard rubber grommets. I pushed the edges in from outside to inside and worked around the entire edge before it pushed through. It seemed as though the plug was going to break or get damaged, but it just took a little effort and working around the entire edge. Used a flat head screw driver to do the deed. Hope that helps somewhat

02-12-2013, 05:03 PM	#5
Bret B Registered User Join Date: Nov 2007 Location: Altus OK Posts: 143	Re: How remove wiring plugs from firewall Just pulled mine out last week. The plugs are held in with semi-hard rubber grommets. I pushed the edges in from outside to inside and worked around the entire edge before it pushed through. It seemed as though the plug was going to break or get damaged, but it just took a little effort and working around the entire edge. Used a flat head screw driver to do the deed. Hope that helps somewhat __________________ 1965 Chevy short-step side, work in progress.... ............................____ ..................______l/___\____ .................\|_/(0)\_ll____/(0)_l.