[midniteblues]

this is what i'm planing/doing. so far the 4spd bolts in with no problems I useing a saginaw w/no grooves on the input behind a very mild 454.I'm definitly not doing this too race or beat on it it will just be a gas sucking cool cruizer

I gotta get some of the offset shift levers off a sag 3 spd (the kind that bolts too the shift forks not the kind that clamps on)these should give me the off set spaceing for the shift rods too the colum

on too the reverse well this is something i've been running through and through cause i'm keeping my interior as factory appearing as possible
one thought was
1. small lever between buddy seats
2.a atv brake/clutch locking lever an cable(mounted underneth too the buddy frame)
3.a power door lock selinoid custom mounted on the trans with a button somewhere in the cab
4.a floor mounted e brake handle from something(mounted under the seat)
5.useing the oe e brake handle and installing a later style e brake pedal
6.a throttle lock handle/cable from a big truck


these are just some of the ideas ive been pondering but of course everyday i come up with something else