[Coboyle04]

well the push rod for the brake has been adapted with an adjustable fitting to better reach the pedal. and finally mounted. we bench bled the master cylinder and then the brakes. only 2 leaks so far. i expect more leaks when the motor is running and the hydro boost pressure is applied to the brakes.
also mounts and brakets are in process for the radiator and intercooler. should be done this week, fingers crossed!
and finally here is a picture of the grid heater for extreme cold weather starts.

the last picture is an eyelet for hoisting the motor in the future as well as a solid anchor for aligning the accessory bracket and coolant intake port.