The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - How low can you go with stock control arms on the front?

Mike C · 02-26-2013, 09:52 PM

Will have some bearing on how you lower it. You should still be able to get the camber in spec with 4" spring, and 2 1/2" spindle on top of that would get you 6.5". But I would consider doing the spindle with a 2" spring which would get you 4.5" with NO alignment issues and plenty of room for tire.

02-26-2013, 09:52 PM	#4
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,739	Re: How low can you go with stock control arms on the front? Will have some bearing on how you lower it. You should still be able to get the camber in spec with 4" spring, and 2 1/2" spindle on top of that would get you 6.5". But I would consider doing the spindle with a 2" spring which would get you 4.5" with NO alignment issues and plenty of room for tire. __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax