The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Andy4639 · 02-27-2013, 05:09 PM

I remember a long time ago some one posted about doing this in there truck. I searched and searched but came up empty so I started last night after getting the dash back together. I have made the templetes and have the small peice drying with the leather glued to it so I will get pictures after it's done. Here is the bigger peice just mocked up under the dash. I will cover it some time this week I hope.
I'm covering them in the same material as the dash pad.
I may buy another peice of this door panel stuff and make it all one peice also.
I had this stuff left over from the doors so I'm just mocking it up right now.

02-27-2013, 05:09 PM	#1
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Cleanning up under the dash! I remember a long time ago some one posted about doing this in there truck. I searched and searched but came up empty so I started last night after getting the dash back together. I have made the templetes and have the small peice drying with the leather glued to it so I will get pictures after it's done. Here is the bigger peice just mocked up under the dash. I will cover it some time this week I hope. I'm covering them in the same material as the dash pad. I may buy another peice of this door panel stuff and make it all one peice also. I had this stuff left over from the doors so I'm just mocking it up right now. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.