The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Hx16457 · 03-06-2013, 08:14 PM

My 350 is in the forward mounting position! (LWB)
My one piece drive shaft measured 71.5", I had to cut it down to 69.5!
So it will just depend as to what you start with!
But like someone said up top, cut the shaft last, test fit it in there to be sure what you need!
Oh and mine was 27 spline, just FYI
Posted via Mobile Device

03-06-2013, 08:14 PM	#15
Hx16457 Registered User Join Date: Sep 2012 Location: Lawton Oklahoma Posts: 308	Re: 700r TRANNY SWAP HELP My 350 is in the forward mounting position! (LWB) My one piece drive shaft measured 71.5", I had to cut it down to 69.5! So it will just depend as to what you start with! But like someone said up top, cut the shaft last, test fit it in there to be sure what you need! Oh and mine was 27 spline, just FYI Posted via Mobile Device __________________ People who make excuses didn't want to do it in the first place! http://s1326.photobucket.com/albums/...cpZZ1QQtppZZ16 Last edited by Hx16457; 03-06-2013 at 08:20 PM.