The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Damon23 · 03-06-2013, 10:10 PM

After working out the little fitment issue with my spindles I finally got both sides done. I'm very happy with the drop on the front. Now I've got to get the rear shackles done. I also installed the bumper guards that I got from a gracious member here. I think they really set off these square body trucks. Thinking of adding a hood ornament as well but on the fence about that. Sorry for the bad pics. Obviously it got dark on me. The first spindle took me 2 hours to get done. I had the passenger side done is 45 minutes with limited skinned knuckles. The worst I got was a puncture wound on my wrist from the darn bolts/screw that holds the lower air dam on when the ratchet slipped off the bumper bolt when I was installing the bumper guards.

03-06-2013, 10:10 PM	#1
Damon23 Registered User Join Date: Sep 2009 Location: D'ville Georgia Posts: 470	Phase 1 of my drop done After working out the little fitment issue with my spindles I finally got both sides done. I'm very happy with the drop on the front. Now I've got to get the rear shackles done. I also installed the bumper guards that I got from a gracious member here. I think they really set off these square body trucks. Thinking of adding a hood ornament as well but on the fence about that. Sorry for the bad pics. Obviously it got dark on me. The first spindle took me 2 hours to get done. I had the passenger side done is 45 minutes with limited skinned knuckles. The worst I got was a puncture wound on my wrist from the darn bolts/screw that holds the lower air dam on when the ratchet slipped off the bumper bolt when I was installing the bumper guards. __________________ Experience is something you gain when you didn't get what you wanted in the first place. No great defeat was ever just possible in the beginning.