[Hawks]

Well after i got it back togeather with the old pressure plate and got it working. i drove it around and had no problems. and when i took it apart it was in right. and i comparied the plates and saw no major differences. and i just sanded the pressure plate and flywheel before i put it back togeather. i think it was something with the slave cylinder. because the PO had a spacer plate on the bellhousing putting the clyinder foward an inch i dont know why. so when i had it togeather the first time i just took it off and bolted it to the bellhousing like it is suposted to be. then after that wouldn't work i took the plate and put it back on so it made the slave cylinder closer to the fork. i don't know why i had to its a new slave cylinder and i rebuilt the master cylinder months ago. but it works fine know. so thanks for all of yalls advice.