[clemsonteg]

Originally Posted by PanelDeland

All you need to know to get it to shift like new.

http://67-72chevytrucks.com/vboard/s...d.php?t=215307

I followed this and mine improved.

I adjusted the linkage and ordered 2 of these for the shift tube:

http://www.classicparts.com/1947-76-.../#.UT4KADcU2o8

And 4 of these for the linkage at the trans, it says only 2 but I think its wrong because what was left of mine there were 4:

http://www.classicparts.com/1960-76-.../#.UT4KOTcU2o8

I also got 2 new clips at for the trans linkage:

http://www.classicparts.com/1960-72-.../#.UT4KYzcU2o8

I haven't tried spraying lube inside the cab, I will need to try that. One problem I have is all the slop at the shifter itself, it has a new pin but I think the internal collar has seen better days. When the trans is in gear I can move the lever 2 inches up and down without effecting the linkage and everything else is adjusted I believe. I haven't found any replacement parts (I believe it is the shift socket?) for that so I will just live with it.