The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Captainfab** · 03-15-2013, 12:29 AM

The engine and trans is supposed to be about 4 degrees down to the rear as installed from the factory. This will keep the carb close to level. I'm not sure why yours is only 1 degree.

03-15-2013, 12:29 AM	#10
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,254	Re: Pinion angle The engine and trans is supposed to be about 4 degrees down to the rear as installed from the factory. This will keep the carb close to level. I'm not sure why yours is only 1 degree. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE