|
Re: Rocker Help before I place order.
Item 10 is a patch. It is part of 3, 4, or 7. I bought them by mistake and wound up using them as patch steel for other areas.
Item 12 is under the floor spot welded to the bottom of the floor pan. It runs front to rear. Mine was in good shape so I left it alone. You shouldn't need any reinforcement once all the steel is good.
I have some pics in my build thread, but basically I just cut out all the rot and started piecing together what I needed from the patch panels.
If you have any significant rust in the rockers, I would bet on needing #2, 8, and 9 as well.
If the floor is bad you will likely need 13 and 16 as well.
I also would recommend buying from somewhere other than LMC. The parts I got from them were so/so at best.
|