Quote:
Originally Posted by midniteblues
your correct on item #10 thats a inner rocker panel parts of that are included in the other two items but you gotta be sure that you inners are good past the first set of cab support bolts theres 4 bolts on the cab supports front/rear and #10 only uses two of each
If you got item #7 it incorparates the peices together for less mess/fuss but its not needed if the front and rear of yor cab floor/inner rocker is good personally i think # 7 is the way too go that is if you need all that
its allways a good idea to get a lil' more than what you think you need cause the evil rust is hideing there where you didnt think it is
yep that # 8 & 9 is one of those peices that you dont see till its all off then you'll see "oh i need #8 & 9"
|
I bought #7, but I did find I had to cut it in half to fit it in the truck. Wound up putting in the 2 pieces and welding them back together.
For my rust I used 7, 3, 13, 16, 2, 8, and 9. I really should have bought 5 for the RH side, but I wound up making my own patch panel out of leftovers from the the floor pan patches. The LH side was fine in that area.