The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Hx16457 · 03-17-2013, 07:57 AM

Cap, I am thinking that my floor is not 100% level so that would account for the degree differences, (older house on clay soil in OK, this stuff never stops shifting).
If I had a shop with a true floor, it might be dead on, but I must just go with what I have so the matching of the angles is all I can do.
My carb seems to be okay with it's angle (?) whatever it truly is as it will bust off and idle with no problems.

Posted via Mobile Device

03-17-2013, 07:57 AM	#17
Hx16457 Registered User Join Date: Sep 2012 Location: Lawton Oklahoma Posts: 308	Re: Pinion angle Cap, I am thinking that my floor is not 100% level so that would account for the degree differences, (older house on clay soil in OK, this stuff never stops shifting). If I had a shop with a true floor, it might be dead on, but I must just go with what I have so the matching of the angles is all I can do. My carb seems to be okay with it's angle (?) whatever it truly is as it will bust off and idle with no problems. Posted via Mobile Device __________________ People who make excuses didn't want to do it in the first place! http://s1326.photobucket.com/albums/...cpZZ1QQtppZZ16 Last edited by Hx16457; 03-17-2013 at 08:04 AM.