Quote:
Originally Posted by JellyBeanDriver
Not sure that would work with mine, the door panel is in the way as it curves in and over the path the pin would take.
This kit came with thicker bushings. Given how the OEM bushings all fractured and split apart - I am tempted to drill for the oversize bushings.
Or maybe I'm thinking about it wrong - bushings are softer than steel so I suppose thin ones would be best if the hole is not ovaled.
|
I took the door off the truck first before I cut the pins. Maybe it could be done with the door still on, but there won't be much room to work.
Posted via Mobile Device