The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Project 67 DRGNWGN

**kev2809** · 03-24-2013, 08:20 PM

nvm i got it...i had the linkage backwards on the carb. i also had to cut, bend, and drill a new hole in the rod, but i got it. turns on, runs and idles smooth after some adjustments. just leaks a little fuel from the front hose i think, i gotta work on that. gonna fix the driveshaft carrier bearing not aligning with the bolt holes, do the rear brakes and it should be ready to drive around the block !!!!!

03-24-2013, 08:20 PM	#658
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,141	Re: Project 67 DRGNWGN - 67 Burban!! nvm i got it...i had the linkage backwards on the carb. i also had to cut, bend, and drill a new hole in the rod, but i got it. turns on, runs and idles smooth after some adjustments. just leaks a little fuel from the front hose i think, i gotta work on that. gonna fix the driveshaft carrier bearing not aligning with the bolt holes, do the rear brakes and it should be ready to drive around the block !!!!! __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]