The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - how to test oil pressure sender and gauge

UATahoe · 03-28-2013, 10:51 AM

Awesome. Thanks! I pulled up the wiring schematic for the truck. It is a tan wire. I will use an elbow on the top mounting location for the oil pressure/fuel pump sensor.

I will go ahead and utilize the port above the oil filter for the oil pressure sending unit for the dash gauge. 99% certain thats how the old motor was rigged up. Hopefully i can find fittings to work.

03-28-2013, 10:51 AM	#24
UATahoe Registered User Join Date: Mar 2012 Location: Huntsville, AL Posts: 1,000	Re: how to test oil pressure sender and gauge Awesome. Thanks! I pulled up the wiring schematic for the truck. It is a tan wire. I will use an elbow on the top mounting location for the oil pressure/fuel pump sensor. I will go ahead and utilize the port above the oil filter for the oil pressure sending unit for the dash gauge. 99% certain thats how the old motor was rigged up. Hopefully i can find fittings to work.