The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

danw210 · 03-30-2013, 09:12 PM

I have a set of new Sealed Power/Federal Mogul #345NP pistons with a 4.040 bore and Chevy 5.7 connecting rods. They are new, never installed. The pistons are dished 5cc's and with a 64cc head will give a compression ratio of about 10.2:1 I believe. I was going to use them on my build but I have to go to a .060 over bore so I bought a rotating assembly. $200 obo

Name: IMG_0412.jpg
Views: 194
Size: 54.9 KB

Name: IMG_0412.jpg
Views: 194
Size: 54.9 KB

Name: IMG_0413.jpg
Views: 179
Size: 36.5 KB

Name: IMG_0414.jpg
Views: 184
Size: 47.8 KB

Name: IMG_0415.jpg
Views: 178
Size: 52.4 KB

03-30-2013, 09:12 PM	#1
danw210 69 K20 Join Date: Mar 2009 Location: Elizabethtown, KY Posts: 426	Set of SB 5.7 rods and .040 pistons I have a set of new Sealed Power/Federal Mogul #345NP pistons with a 4.040 bore and Chevy 5.7 connecting rods. They are new, never installed. The pistons are dished 5cc's and with a 64cc head will give a compression ratio of about 10.2:1 I believe. I was going to use them on my build but I have to go to a .060 over bore so I bought a rotating assembly. $200 obo Last edited by danw210; 03-30-2013 at 10:14 PM.