The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Adding Power Brakes to 66 can't get bleed or any pedal

buildinga55 · 03-31-2013, 10:39 PM

The kit actually came with the little spacer that goes in the MC and brings the contact point up to about the surface of the MC where it goes on the booster. However, when you bolt the booster to the MC it actually preloads the MC which is not good, so I shortened the spacer to normal specs. After all the trouble I put an original spacer back in and still have issues with not a firm pedal and goes to the floor basically.

03-31-2013, 10:39 PM	#3
buildinga55 Registered User Join Date: Jan 2009 Location: Springfield, MO Posts: 258	Re: Adding Power Brakes to 66 can't get bleed or any pedal The kit actually came with the little spacer that goes in the MC and brings the contact point up to about the surface of the MC where it goes on the booster. However, when you bolt the booster to the MC it actually preloads the MC which is not good, so I shortened the spacer to normal specs. After all the trouble I put an original spacer back in and still have issues with not a firm pedal and goes to the floor basically.