The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Does the master cylinder have to be bench bled when..

mgchevyparts · 04-05-2013, 08:31 PM

The shuttle valve in the prop valve moved when you lost your fluid, that is what triggered the light to come on. If it's back off then it must have moved back to center. If it isn't centered you can reset it by opening a front and a rear bleeder at the same time while bleeding to equalize the pressure to move it back into position.

04-05-2013, 08:31 PM	#6
mgchevyparts Registered User Join Date: Feb 2013 Location: Upland, Calif Posts: 698	Re: Does the master cylinder have to be bench bled when.. The shuttle valve in the prop valve moved when you lost your fluid, that is what triggered the light to come on. If it's back off then it must have moved back to center. If it isn't centered you can reset it by opening a front and a rear bleeder at the same time while bleeding to equalize the pressure to move it back into position.